Safety Data SheetChemical Risk Assessment
Sodium-potassium Alloy (Eutectic Grade Na:K Approximately 33:67 By Weight)
by Dounreay Site Restoration Limited
SDS · PDF, approx. 220 KB CRA · PDF, approx. 180 KB
Sodium-potassium Alloy (Eutectic Grade Na:K Approximately 33:67 By Weight) is supplied by Dounreay Site Restoration Limited under product code n/a. This page provides both the Safety Data Sheet (SDS) and the Chemical Risk Assessment (CRA) for this substance, under GHS/CLP regulations for UK workplace use under COSHH. The full SDS and CRA documents are available to download above.
This SDS was last revised on 30 April 2031. The matching CRA is updated in line with SDS revisions. Workplaces handling this substance should retain a current SDS and risk assessment for the duration of use.
- Language
- English
- Regulation
- GHS/CLP
- Revision Date
- 30 Apr 2031
- Signal Word
- DANGER
- Product Code
- n/a
- CAS Number
- 11135-81-2
Switch between the Safety Data Sheet and the Chemical Risk Assessment for this substance.
Hazards at a GlanceFrom the Safety Data Sheet
Signal Word: DANGER
GHS02Flammable
GHS05CorrosiveHazard Statements (H-phrases)
- H260
- In contact with water releases flammable gases which may ignite spontaneously.
- H314
- Causes severe skin burns and eye damage.
- EUH014
- Reacts violently with water.
Need the full hazard breakdown? Precautionary statements, first aid, physical properties and exposure controls are in the full SDS PDF.
Common QuestionsAbout this Safety Data Sheet
This Safety Data Sheet was issued by Dounreay Site Restoration Limited on 30 April 2031 under GHS/CLP. ISDSS syncs its database regularly to keep documents current.
Yes, a free ISDSS account is required to download the PDF. Registration takes under two minutes and gives you access to over 1.5 million Safety Data Sheets. Once registered, you can also save documents to your personal library for quick access.
The manufacturer, importer or supplier that places the substance on the market is responsible for providing a current Safety Data Sheet to downstream users, free of charge.
No. An SDS provides the hazard information you need, but a COSHH assessment must consider how the substance is actually used in your workplace. The matching Chemical Risk Assessment (CRA) on this page is a starting point you should adapt to your own tasks and controls.
Chemical Risk Assessment SummaryFrom the Chemical Risk Assessment
Assessment Summary
This Chemical Risk Assessment is derived from the Safety Data Sheet for Sodium-potassium Alloy (Eutectic Grade Na:K Approximately 33:67 By Weight) issued by Dounreay Site Restoration Limited on 30 April 2031 It presents the substance's hazards organised by risk level, with the relevant regulatory statements and recommended controls for each. These hazards are rated across one level: High Risk, based on the hazard classifications in the SDS.
Hazard PreviewA snapshot of substance hazards and controls
Rating Before Controls
HIGH RISK
H260: In contact with water releases flammable gases which may ignite spontaneously
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P223: Keep away from any possible contact with water, because of vio-lent reaction and possible fl ash fire.
P231 + P232 Handle under inert gas. Protect from moisture.
P402 + P404 Store in a dry place. Store in a closed container.
P501 Dispose of contents/container to correct disposal area.
P335 + P334
Brush off loose particles from skin. Immerse in cool water/wrap in
wet bandages.
1 other control in place
Rating Before Controls
HIGH RISK
H314: Causes severe skin burns and eye damage
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash skin thoroughly after handling.
P501 Dispose of contents/container to correct disposal area.
P405 Store locked up
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P363 Wash contaminated clothing before reuse.
5 other controls in place
Note: This is a preview of the substance's hazards. A substance commonly carries more hazards. Download the full Chemical Risk Assessment for more information.
Recommended Control MeasuresKey PPE and handling controls
Need to download the Chemical Risk Assessment? The full CRA PDF includes all hazard classifications, regulatory statements and recommended controls.
Common QuestionsAbout this Risk Assessment
This Chemical Risk Assessment provides the substance-level hazard inputs needed for a COSHH assessment under the UK Control of Substances Hazardous to Health Regulations 2002. It is not a substitute for a full workplace risk assessment. You must combine this with your own assessment of how the substance is actually used on your site, including task specifics, exposure duration and local controls.
The CRA is derived from the hazard data in the manufacturer's SDS for Sodium-potassium Alloy (Eutectic Grade Na:K Approximately 33:67 By Weight), mapped against standard workplace task profiles. It is updated in line with SDS revisions. The CRA is a starting point for your own assessment, not a finished document.
A Safety Data Sheet is produced by the manufacturer and describes the hazards of the substance itself. A Chemical Risk Assessment evaluates those hazards in the context of how the substance is actually used in the workplace, covering specific tasks, exposure routes and recommended controls. Both documents work together.
Yes, a free ISDSS account gives you access to both the SDS and the linked CRA for over 1.5 million substances. Registration takes under two minutes.