FIBRE GLAST DEVELOPMENTS CORP.
150 Safety Data Sheets and Chemical Risk Assessments supplied by FIBRE GLAST DEVELOPMENTS CORP..
- #1400 EnkaFusion Filter Jacket
- #3608, 3609, 3611, 3612 Unidirectional Carbon Fiber Sleeve
- 1601-A Infusion Adhesive
- 1602-A LVOC Infusion Adhesive
- 1603-A General Purpose Adhesive
- 1604-A Marine Adhesive
- 1K Plain Weave Ultralight Carbon Fiber Fabric
- 2608, 2609, 2622, 2635 Braided Carbon Biaxial Sleeve
- 326 2 LB. MIX AND POUR FOAM (Side B)
- 3K Textral Weave Carbon Fiber Fabric
- 5.7oz Graphite 3K 2 X 2 Twill Weave 50" Wide & 60" Wide
- Carbon Fiber Veil
- EnkaFusion Nylon Flow Media
- Glitterflake - Parts #879 (Silver), #881 (Blue), #882 (Red), #883 (Gold)
- Non-Silicone High Temp Paste Wax
- Nylon Bagging Film, 400F
- PART # #45 Red Polyester/Epoxy Pigment
- PART # #47 Yellow Polyester/Epoxy Pigment
- PART # 1065 - Kevlar Carbon Hybrid Fabric (Yellow)
- PART # 141 White Urethane Pigment
- PART # 143 Black Urethane Pigment
- PART # 1793 - Nylon Bagging Film, 400Y
- PART # 2000 System 2000 Epoxy Resin
- PART # 2001 System 2001 Epoxy Resin
- PART # 2035 System 2001 Epoxy Resin
- PART # 2074 System 2001 Epoxy Resin
- PART # 2160 System 2001 Epoxy Resin
- PART # 223 Woven Roving
- PART # 2320/2323/2324/2327 (Preval)
- PART # 2443, 2469, 2611, 531, 532, 533, 2482, 2495 - Kevlar Fabric (Yellow)
- PART # 2443, 2469, 2611, 531, 532, 533, 2482, 2495 - Kevlar Fabric (Yellow)
- PART # 251 - Continues Strand Mat
- PART # 266 Black BPO Hardener
- PART # 329 1/16 Inch Milled Glass Fibers
- PART # 4202, 4203 (Non-Skid Rubber Gel Coat Additive)
- PART # 43 Black Polyester/Epoxy Pigment
- PART # 52 Blue Polyester/Epoxy Pigment
- PART # 526 Gun Roving
- PART # 530 - 3K Plain Weave Carbon Fiber Fabric
- PART # 581 Gray Sealant Tape
- PART # 70 Styrene Thinner
- PART # 971-A - 4-1/2" X 7/8" Ceramic Resin Fiber Sanding Discs
- PART # 972, 973, 974-A Gold Hook And Loop Sanding Discs
- PART # Carbon Fiber Tape Parts #692 (2"), #693 (3), #694 (4"), #696 (6")
- PART # Woven Fiberglass Tapes Parts #217 (1"), #219 (2"), #220 (3"), #221 (4"), #222 (6"), #224 (12")
- Part #1000 - System 1000 Epoxy Resin
- Part #1010 - System 1000 10 Min. Cure
- PART #1025 25 Minute Epoxy Cure
- PART #1072, 12K 19.8 Oz Carbon Fiber Twill
- PART #1073, 6K 10.9 Oz Carbon Fiber Twill
- PART #1094 Style 7725 Bi-Directional E-Glass
- Part #1096 High Temp Epoxy Surface Coat, Side A
- Part #1098 Epoxy Surface Coat, Part A
- PART #1099 (Epoxy Resin)
- PART #1101 - Epoxy Paste Bonding Adhesive, Part A
- PART #1102 Step 1 Mold Polish
- PART #1103 Step 2 Mold Polish
- PART #1131 - Talc
- PART #13 - PVA
- PART #1403 Spiral Tubing
- PART #1405 (VP-REDMSH-TSD-ROL-NC, Infusion Flow Red)
- PART #1406 (Green Hdpe Infusion Flow Media)
- PART #1543 Style 6781 S2-Glass
- PART #1562 Nomex Honeycomb, 1.8 Lb, #2562 Nomex Honeycomb, 3 Lb.
- PART #1580, 1781 (Perforated) Low Temperature Release Film
- PART #1581 (Synthetic Surfacing Veil)
- PART #1582, #1583 Econostitch Peel Ply, 30 And 60" Wide
- PART #1678, 1778, 1688, 1788 Bagging Films
- PART #1785 Nylon Bagging Film, Below 300F
- PART #1791, 20 Percent Shrink Tape, 1.25 And Part #1792, 20 Percent Shrink Tape, 2.5"
- PART #180 - Clear Gel Coat
- Part #188 - Orange Tooling Gel Coat
- PART #2020 Epoxy Resin
- PART #2060 Epoxy Hardener
- Part #2120 Epoxy Hardener
- Part #22 - Glass Microspheres
- PART #23 - Thixotropic Silica
- PART #2403 Omega Flow Channel 1"
- PART #241 - 2 Oz. Fiberglass Fabric
- PART #243, #244 7-1/2 Oz. Fiberglass Fabric, 38" Wide And 50" Wide
- PART #245, 247, 271 10 Oz Fiberglass Fabric (38, 50", 60" Wide)
- PART #246 Scrim Fabric, White
- PART #25 And #625 MIX AND POUR FOAM (A Side)
- PART #250 (38) And #1250 (50) Chopped Strand Mat
- PART #254 20 Oz. Tooling Fabric
- Part #2583 - 9.0 Oz Unidirectional Carbon Fabric
- PART #2583 - 9.0 Oz Unidirectional Carbon Fabric, Combi Bonding Yarn
- Part #2585 - 4.0 Oz Unidirectional Carbon Fabric
- PART #259 6 Oz Fabric, 38 Wide
- PART #2595 22.3 Oz Unidirectional Carbon Fabric, Combi Bonding Yarn
- Part #2595 - 22.3oz Unidirectional Carbon Fabric
- Part #260 - Continuous Strand Veil Surfacing Mat
- Part #2610 - Braided Fiberglass Biaxial Sleeve
- PART #262 4 Oz Fabric, 38 Wide
- Part #30 - 1/4" Chopped Glass Fibers
- PART #3000 - High Temp Epoxy Resin
- Part #3300 High Temp Epoxy Resin
- PART #3330 (Modified Amine Mixture)
- PART #3340 (Urethane Hardener)
- PART #3360 (Urethane Hardener)