Safety Data SheetChemical Risk Assessment

Masterseal M 790 Grey Part A

Name: Masterseal M 790 Grey Part A
Brand: BASF plc

by BASF plc

SDS · PDF, approx. 220 KB CRA · PDF, approx. 180 KB

Masterseal M 790 Grey Part A is supplied by BASF plc under product code 30672836 /SDS_GEN_GB/EN. This page provides both the Safety Data Sheet (SDS) and the Chemical Risk Assessment (CRA) for this substance, under GHS/CLP regulations for UK workplace use under COSHH. The full SDS and CRA documents are available to download above.

This SDS was last revised on 28 March 2017. The matching CRA is updated in line with SDS revisions. Workplaces handling this substance should retain a current SDS and risk assessment for the duration of use.

Language: English
Regulation: GHS/CLP
Revision Date: 28 Mar 2017
Signal Word: DANGER
Product Code: 30672836 /SDS_GEN_GB/EN
CAS Number: 1305-62-0,107-21-1,64741-65-7

Switch between the Safety Data Sheet and the Chemical Risk Assessment for this substance.

Hazards at a GlanceFrom the Safety Data Sheet

Signal Word: DANGER

GHS08Health hazard

GHS07Harmful / irritant

GHS05Corrosive

Hazard Statements (H-phrases)

H318: Causes serious eye damage.
H315: Causes skin irritation.
H335: May cause respiratory irritation.
H373: May cause damage to organs through prolonged or repeated exposure.

Need the full hazard breakdown? Precautionary statements, first aid, physical properties and exposure controls are in the full SDS PDF.

Common QuestionsAbout this Safety Data Sheet

Chemical Risk Assessment SummaryFrom the Chemical Risk Assessment

Assessment Summary

This Chemical Risk Assessment is derived from the Safety Data Sheet for Masterseal M 790 Grey Part A issued by Basf Plc on 28 March 2017 It presents the substance's hazards organised by risk level, with the relevant regulatory statements and recommended controls for each. These hazards are rated across two levels: High and Low Risk, based on the hazard classifications in the SDS.

Hazard PreviewA snapshot of substance hazards and controls

Rating Before Controls

HIGH RISK

H318: Causes serious eye damage

P280: Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call a POISON CENTER or doctor/physician

Rating Before Controls

HIGH RISK

H373: Causes damage to organs through prolonged or repeated exposure

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P501 Dispose of contents/container to correct disposal area

P314 Get medical advice/attention if you feel unwell

Rating Before Controls

LOW RISK

H315: Causes skin irritation

P264 Wash skin thoroughly after handling.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

P362 Take off contaminated clothing and wash before reuse.

P302 + P352 IF ON SKIN: wash with plenty of soap and water

P321 Specific treatment (see … on this label)

P332 + P313 IF SKIN irritation occurs: Get medical advice/attention.

Note: This is a preview of the substance's hazards. A substance commonly carries more hazards. Download the full Chemical Risk Assessment for more information.

Recommended Control MeasuresKey PPE and handling controls

Need to download the Chemical Risk Assessment? The full CRA PDF includes all hazard classifications, regulatory statements and recommended controls.

Common QuestionsAbout this Risk Assessment

Free with ISDSS

Manage Your SDS Library

Build a personal library of every SDS your workplace uses. Search, download and access documents any time you need them.

Masterseal M 790 Grey Part A

Need help with Safety Data Sheets? You've come to the right place!

Follow Us