Safety Data SheetChemical Risk Assessment

Leadfree Solder Wire Tin-Copper Alloy With Resin Based Flux

Name: Leadfree Solder Wire Tin-Copper Alloy With Resin Based Flux
Brand: BALVER ZINN Josef Jost GmbH & Co. KG

by BALVER ZINN Josef Jost GmbH & Co. KG

SDS · PDF, approx. 220 KB CRA · PDF, approx. 180 KB

Leadfree Solder Wire Tin-Copper Alloy With Resin Based Flux is supplied by BALVER ZINN Josef Jost GmbH & Co. KG under product code 950204. This page provides both the Safety Data Sheet (SDS) and the Chemical Risk Assessment (CRA) for this substance, under GHS/CLP regulations for UK workplace use under COSHH. The full SDS and CRA documents are available to download above.

This SDS was last revised on 24 November 2016. The matching CRA is updated in line with SDS revisions. Workplaces handling this substance should retain a current SDS and risk assessment for the duration of use.

Language: English
Regulation: GHS/CLP
Revision Date: 24 Nov 2016
Signal Word: DANGER
Product Code: 950204
CAS Number: —

Switch between the Safety Data Sheet and the Chemical Risk Assessment for this substance.

Hazards at a GlanceFrom the Safety Data Sheet

Signal Word: DANGER

GHS07Harmful / irritant

GHS08Health hazard

Hazard Statements (H-phrases)

H317: May cause an allergic skin reaction.
H351: Suspected of causing cancer.
H372: Causes damage to organs through prolonged or repeated exposure.
EUH208: Contains a sensitising substance. May produce an allergic reaction.
EUH210: Safety data sheet available on request.

Need the full hazard breakdown? Precautionary statements, first aid, physical properties and exposure controls are in the full SDS PDF.

Common QuestionsAbout this Safety Data Sheet

Chemical Risk Assessment SummaryFrom the Chemical Risk Assessment

Assessment Summary

This Chemical Risk Assessment is derived from the Safety Data Sheet for Leadfree Solder Wire Tin-Copper Alloy With Resin Based Flux issued by Balver Zinn Josef Jost Gmbh & Co. Kg on 24 November 2016 It presents the substance's hazards organised by risk level, with the relevant regulatory statements and recommended controls for each. These hazards are rated across two levels: High and Low Risk, based on the hazard classifications in the SDS.

Hazard PreviewA snapshot of substance hazards and controls

Rating Before Controls

HIGH RISK

H351: Suspected of causing cancer

P201 Obtain special instructions before use.

P202 Do not handle until all safety precautions have been read and un-derstood.

P281 Use personal protective equipment as required

P501 Dispose of contents/container to correct disposal area.

P405 Store locked up

P308 + P313 IF exposed or concerned: Get medical advice/attention.

Rating Before Controls

HIGH RISK

H372: Causes damage to organs through prolonged or repeated exposure

P264 Wash hands thoroughly after handling.

P270 Do not eat, drink or smoke when using this product.

P501 Dispose of contents/container to correct disposal area

P260 Do not breathe dust/fume/gas/mist/vapours/spray.

P314 Get medical advice/attention if you feel unwell.

Rating Before Controls

LOW RISK

H317: May cause an allergic skin reaction

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P272 Contaminated work clothing should not be allowed out of the workplace.

P501 Dispose of contents/container to correct disposal area.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

P363 Wash contaminated clothing before reuse.

P321 Specific treatment (see … on this label)

2 other controls in place

Note: This is a preview of the substance's hazards. A substance commonly carries more hazards. Download the full Chemical Risk Assessment for more information.

Recommended Control MeasuresKey PPE and handling controls

Need to download the Chemical Risk Assessment? The full CRA PDF includes all hazard classifications, regulatory statements and recommended controls.

Common QuestionsAbout this Risk Assessment

Free with ISDSS

Manage Your SDS Library

Build a personal library of every SDS your workplace uses. Search, download and access documents any time you need them.

Leadfree Solder Wire Tin-Copper Alloy With Resin Based Flux

Need help with Safety Data Sheets? You've come to the right place!

Follow Us